ANSI 40A-B-1-2-3 Sprockets and Platewheel

Product Item:HXST-064

Model: ANSI 40A-B-1-2-3 Sprockets and Platewheel

Material: C45, stainless steel, etc.

Surface treatment:Teeth hardened, Black oxide, Zinc plated, Electrophoresis etc

Package:Standard export case, individual package (neutral or colorbox) available.

Description

ANSI 40A-B-1-2-3 designation refers to a specific type of sprocket and platewheel that follows the American National Standards Institute (ANSI) standard.

The "40" in ANSI 40A-B-1-2-3 represents the pitch diameter of the sprocket, which is 0.5 inches. This measurement is used to determine the size and compatibility of the sprocket with other components in a mechanical system.

The "A-B" in ANSI 40A-B-1-2-3 indicates the hub type of the sprocket. The specific letters represent different types of hubs that can be used with this sprocket size. The choice of hub type depends on the requirements of the application and the desired installation method.

The "1-2-3" in ANSI 40A-B-1-2-3 refers to the number of teeth on the sprocket. This particular sprocket has 1 tooth on the smallest size, 2 teeth on the middle size, and 3 teeth on the largest size. The number of teeth determines the ratio of rotational speed between the driving and driven components in a mechanical system.

Platewheels are essentially sprockets without any teeth. They are typically used as tensioning or guide wheels in belt and chain drive systems.

Overall, the ANSI 40A-B-1-2-3 sprockets and platewheels are part of a standardized system for transmitting rotary motion between components in a mechanical system.