How to easily remove carbon and oil from the chain

Today we will explain to you some knowledge about this. In view of this knowledge, we should understand that the chain has been used for a long time, and the surface is prone to carbon deposits and oil stains. So how to remove it easily? I will teach you some techniques today.

If there is carbon deposits on the chain, you must remove it without harming the chain by using both chemical and mechanical methods. The former is to directly immerse the chain in the prepared chemical solution, wait for the coal deposits to soften and loosen, then remove the parts, wipe them with a brush or cotton, and then wash them with hot water. The latter is to remove carbon deposits with tools such as metal brushes and spades. Although simple, it is difficult to completely remove carbon deposits.

If the chain is not contaminated with carbon but is stained with oil, organic solvents and alkaline solutions can remove it, so that the chain can be restored to a smooth and new surface and good performance.

It is well known that our chain is composed of many connecting pieces. In use, we found that many chain damages are caused by the fracture near the hole of the connecting piece, and there are auras before the break: microcracks around the hole until fracture.

This phenomenon is called fatigue damage.

根本 The fundamental solution to the problem is to reduce the load or replace the chain with a large bearing capacity, especially from the moment when the crack is found. After all, the crack develops quickly and must be paid attention to.