What are the specific uses of the conveyor chain

1. The escalator uses an escalator chain, which is actually a kind of Conveyor Chain. His working principle is that the core component of the escalator is two chains, which rotate around two pairs of Gears. At the top of the escalator, a motor drives the transmission gear to rotate the chain ring. A typical escalator uses a 100 horsepower engine to turn gears. Both the engine and the chain system are installed in a frame, which refers to a metal structure that extends between two floors.

The chain inspection method: the chain length accuracy should be measured according to the following requirements: 1. The chain is cleaned before the measurement 2. The chain to be tested is surrounded by two sprockets, and the upper and lower sides of the chain to be tested should be supported 3. The chain before the measurement should be supported Stay for 1 min under the state of applying one-third of the minimum ultimate tensile load. 4. During measurement, apply the specified measurement load on the chain to make the upper and lower chains tensioned. The chain and the sprocket should ensure normal meshing 5. Measure the two sprockets Center distance chain structure: